LM 132 PTFE-Gleitlack
(PTFE Anti-Friction Lacquer)
DESCRIPTION PTFE dispersion in
thermoplastic resin solution manufactured according to a special
method. LM 132 PTFE Anti-Friction Lacquer combines the unique
properties of PTFE with the high wear resistance of a synthetic
resin. The film cures at room temperature.
PROPERTIES - basic lubrication and "for life"
- outstanding adhesion properties on nearly all substrates
- high wear resistance
- excellent slip and separation properties
- very low coefficient of friction
- no heat treatment required
- resistant for certain organic acids and alkalis
DATA Colourpale, clear
Carrier fluidmixture of solvents
Operating temperature range: up to 80 °C
Spreading rate (cover)0.9 m2/can
APPLICATION LM 132 PTFE Anti-Friction Lacquer
can be applied to nearly all substrates such as metals, wood and
plastic etc. Before applying to plastic and paint, the product must
be checked to find out whether the solvents in it are compatible
with the surface.
INSTRUCTIONS Apply thinly and uniformly to the
cleaned and degreased surface. Preparing the surface beforehand
mechanically or chemically by sand blasting etc. improves the
adhesion of the anti-friction lacquer. The sprayed coating
thickness should be between 10 and 30 mm.
If a much thicker coating is required, several layers must be
applied one after the other. When doing this, if must be ensured
that each coat is thoroughly dry before applying the next coat. The
film dries at room temperature within a few minutes but the curing
time is approx. 2 hours. After this time has elapsed, the coating
is hard and smooth. Warming gently to 65 °C using
infrared lamps, hot air or in a drying oven reduces the curing
LM 132 PTFE Anti-Friction Lacquer must be stored cold (below +25
The product must be used below 65 °C.
The usual safety measures which apply to the storage and use of
flammable materials must be followed as must the guidelines for
handling PTFE powder.
After use, clear spray nozzle by inverting can and spraying
until only the propellant emerges.
PACK SIZE LM 132 PTFE Anti-Friction Lacquer 300 ml
Part no. 4035